Razer Panthera EZ MOD

Razer Panthera EZ MOD

Modify your Razer Panthera to use any of Brook’s PCBs easily. Will also allow install of custom Pico Fighting Boards that have been adapted to the Standard Fight Stick PCB layout (more advanced mod, not as easy). This EZ MOD is allows for one minor modifications to your Panthera stick replacing the stock PCB and handling all signal transformations to the Brook PCB. You must cut the USB wires from the stock Panthera PCB to use with the EZ MOD.

Recommended accessories:

1. Brook PCB (most work) or Pico Fighting Board (more complex mod)
   

Recommended tools:

1. Phillips screw driver

Includes:

• EZ MOD PCB
• 4x Plastic Spacers
• 8x M3 screws (4mm long)
• 1x 20P Female Header (mounts to underside of PCB you intend to use)
• 2x 4P Female Headers (mounts to underside of PCB you intend to use)
• 1x 4P wire and 1x 5P wire to connect the LED signals, L3, R3, TP to the Brook PCB
• The third 5 pin JST on the EZ MOD will not be used, a wire is not included for it. Brook never implemented full TP tracking into their boards, so this is not needed.

INSTALLATION NOTES