The Kracken Wiring Harness - Recommended Length Guides

 

THE KRACKEN WIRING HARNESS KIT What You Need:

The KRACKEN Wiring Harness Base Kit (the brain of your build) plus the following wire lengths from the main KRACKEN board to each connection point based on your layouts. These are recommendations - you can adjust based on needs.

PANZER FIGHT STICK 5 (SEGA 2P FIRST RUN LAYOUT)

Main Controls:

Auxiliary Buttons:

Remember! One button needs one wiring harness with the correct quick disconnect size.

Purchasing Recommendations:

Option 1 - Direct Routing (Minimum Lengths):

1x 300mm JST PH-5 to NH-5: Lever
3x 300mm JST PH-2 to .110" QDC: Front Left Aux
5x 200mm JST PH-2 to .110" QDC: P1, P2, Front Right Aux (3)
4x 150mm JST PH-2 to .110" QDC: P3, P4, K1, K2
2x 100mm JST PH-2 to .110" QDC: K3, K4

Option 2 - Flexible Routing (Extra Length for Easier Installation):

1x 300mm JST PH-5 to NH-5: Lever
3x 350mm JST PH-2 to .110" QDC: Front Left Aux
5x 250mm JST PH-2 to .110" QDC: P1, P2, Front Right Aux (3)
6x 200mm JST PH-2 to .110" QDC: P3, P4, K1, K2, K3, K4

PANZER FIGHT STICK 5 (TAITO VEWLIX)

Main Controls:

Auxiliary Buttons:

Remember! One button needs one wiring harness with the correct quick disconnect size.

Purchasing Recommendations:

Option 1 - Direct Routing (Minimum Lengths):

1x 300mm JST PH-5 to NH-5: Lever
3x 300mm JST PH-2 to .110" QDC: Front Left Aux
3x 200mm JST PH-2 to .110" QDC: Front Right Aux (3)
6x 150mm JST PH-2 to .110" QDC: P1, P2, P3, P4, K1, K2
2x 100mm JST PH-2 to .110" QDC: K3, K4

Option 2 - Flexible Routing (Extra Length for Easier Installation):

1x 300mm JST PH-5 to NH-5: Lever
3x 350mm JST PH-2 to .110" QDC: Front Left Aux
3x 250mm JST PH-2 to .110" QDC:  Front Right Aux (3)
6x 200mm JST PH-2 to .110" QDC: P1, P2,, P3, P4, K1, K2
2x 150mm JST PH-2 to .110" QDC: K3, K4

The Kracken is highly modular

If you want to make cables of perfect lengths on your own, you can do so with common parts from Digikey! Everything is a JST PH (housing) compatible with PHR connectors.