Mad Catz TE EZ MOD
Jasen's Customs
SKU: MCZTE-EZMOD
Mad Catz TE EZ MOD
Modify your Mad Catz TE/VS/TE-S/TE+S/Brawl Stick/Fight Stick Pro to use any of Brook’s PCBs easily. Will also allow install of custom Pico Fighting Boards that have been adapted to the Standard Fight Stick PCB layout. This EZ MOD is allows for MINIMAL modifications to your MCZ stick replacing the home area PCB and connecting to the new fighting board using the included wiring. You will need to modify (cut and strip) the ribbon cables that come off of the button PCB in each of these sticks and connect them to the screw terminals on the Brook PCB, but that’s the hardest part.
This EZ MOD does work on all MCZ sticks that use the “home” area easily, with one minor difference for the MCZ SE sticks. The SE series has a small PCB for the START and SELECT buttons with connecting wires that require some splicing. Its’ not hard, but it should be noted that does require a splice for the lock out ground.
Recommended accessories:
- Brook PCB (any works) or Pico Fighting Board
- PCB feet to mount your fighting board of choice to the case.
Recommended tools:
- Phillips screw driver
- Allen Key Set
- Wire cutters and Strippers
INSTALLATION NOTES
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
Customer Reviews
Based on 9 reviews
100%
(9)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
F
Before this Mod I had modded the previous board to work with Brook UFB. It took a lot of effort to figure out the cables and I had to solder the cables into the board. Then I discovered Jasen work and I bought the EZMod. Now everything works in a much more stable and reliable form. Really nice Job!
T
I was not able to use the TE EZ MOD product for now because I ordered the wrong part, but I was so impressed with the quality that I decided to order the correct part I needed. I'll use it on another arcade stick at some point and time. I'm proud of the work that you're doing for the FGC community with your mods! Thanks again and I'm looking forward to ordering from you in future!
A
Really great product to breathe new life into the Mad Catz stick that I've had. This was my first time modding a stick and the process was not too difficult. Would highly recommend for those interested in converting their old Mad Catz sticks to newer PCBs.
A
Installed in my XB360 Chun-Li TE without any issues- the swap is super straight forward and Jasen's blog has answers if you get tripped up, This thing is a must have for TE fans that wanna bring their old sticks in to 2024 and I'll be buying a second one for my other TE RD2 stick.
A
Works great with Fightstick Pro SFxT
You may also like
More from EZ MODS
