Madcatz TE2+ EZ MOD


This EZ MOD will allow Mad Catz TE2+ owners to upgrade their fight stick to universal status, which means that you will be able to play on PS3/PS4/Xbox 360/Xbox One/Wii U/Switch and PC. Don't settle for the slow, finicky, failure prone Madcatz PCB. 

You will need to do is remove your existing PCB and using all the cables provided, just plug an play into the EZ MOD. This will require cutting the USB Cable from the stock board and connecting it to the screw terminals on the board.
This mod can be done in under 30 minutes if you are handy with a screw driver. It's very easy!
Includes: EZ MOD Board and Interconnect Cables

Recommendation: Buy the EZ MOD Ready Brook UFB bundled with this. It will make installation EASIER and 90% of UFB desolder jobs end up killing the UFB. If you damage your UFB trying to remove the vertical 20 pin header to install a right angle header, we are not culpable. Modding is always risky and only you assume the risk associated with it. 
Note: BE CAREFUL with the FFC cable that connects the EZ MOD to the TouchPad. The Clip is fragile and if you break it, there is no fixing it unless you buy a replacement part from your favorite electronics shop.
Installation Notes
  • YES! You need a Brook UFB (or PS4 PCB) for this to work. The EZ MOD Does not act as a console PCB in any way, shape or form.
  • There are no jumpers to worry about on this EZ MOD. Everything just works when installed.
  • The Touchpad will not track, but it does click this is normal. If you are running into weird issues when everything is installed, remove the cable between the EZ MOD and the Brook UFB J5 (its the 5pin connector next to the 4 pin Dp/Ls/Rs connector).

Installation Video (TE2 and TE2+ is very similar)